sFlow on Juniper

From: Luca Deri <deri@ntop.org>
Date: 11/05/09
Message-Id: <8F3F9729-9A3C-4279-8D2F-A34DB8D8D43A@ntop.org>

Dear all
I'm playing with sFlow on Juniper switches EX-4200 (JunOs 9.5r27). On
all samples I receive from the switch I see ifDirection=2 that
according to the sFlow specs means half-duplex (http://www.sflow.org/developers/diagrams/sFlowV5CounterData.pdf
), whereas I'm sure that the port is full-duplex. Is my interpretation
of IfDirection value correct ?

Thanks in advance, Luca

---
If you can not measure it, you can not improve it - Lord Kelvin
Received on Thu Nov 5 07:44:43 2009

This archive was generated by hypermail 2.1.8 : 02/17/10 PST